Smooth surfaces. For durable aesthetics: Fine particles with ideal distribution. With this fine, hybrid composite, a high lustre finish is achieved quickly and easily. The fine barium glass particles – with an average size of 1.0 μm are homogeneously distributed in SwissTEC Composite. The composite results in a smooth surface and is an optimum prerequisite for a high gloss finish and a perfect transition between filling and tooth structure. The high radioopacity of the barium glass filler means, that the results of the treatment can be reliably assessed at post operative check-ups.

• Pressed all-ceramic
• Veneers, inlays/onlays, crowns/bridges
• CAD/CAM all-ceramic
• Feldspar blanks, alumina and zirconia blanks
• Metal-free and metal-bonded procelains
• CTE range of 6.0-16.0 x 10-6K-1, firing temperature approx. 880 °C

• Telescopic pliers (5)
  Titanium ceramics (9)
  Tweezers (7)
  Vacuum pumps (2)
  Veneer resins (272)
  Veneers (15)
  Fixation (299)
  Prosthetics (1105)
  Orthodontics (392)
  General lab supplies (1501)

• Shadow-free illumination
• Fast and complete polymerization
• 7- segment LED display Visible display of time remaining
• Manual up/down control of curing table
• Easy and accurate adjustments
• Lamp life indicator Detects when lamps are dead Easy lamp replacement
• Saves time and reduces down time
• Solidilite’s footprint (W9xD93 /4xH131 /2 in.)

A-1. Cleaning of tooth surface Thoroughly clean the tooth surface to remove plaque

A-2. Shade selection Select appropriate shade using a shade guide while the tooth is still moist

A-3. Cavity preparation Prepare the cavity following the conventional method

A-4. Isolation Isolate with a rubber dam

A-5. Pulp protection In the case where the affected area is close to the pulp, cap the pulp with calcium hydroxide etc

• High resistance to compression 149 MPa compared with competitive cements
• Low film thickness, 15 microns optimizing the marginal integrity
• Radiopacity 1,55mm
• Low level of acid erosion 0,02mm
• High fluoride release
• Capsules with 0,53g
• Working time 4 minutes and 10 seconds from start of mixing
• Excellent track record that offers a low film thickness of 18 μ, higher compressive strength, excellent bonding to tooth structure and low water solubility for long lasting restorations.

• Improved GlasIonomer FX II features superior mechanical properties and exceptional handling characteristics for superior clinical performance.
• Enhanced aesthetics with high translucency, fluorescence close to natural teeth and optimal polishability.
• Excellent packable consistency ideal for posterior restoration of deciduous teeth or intermediate restoration of permanent teeth.

• A new enhanced anterior restorative cement specially designed for Class III, Class V, Cervical Erosion / Abrasion and Pedodontic restorations
• The Yellow Brown shade is suitable for most cases with optimized translucency and improved  physical properties
• Improved version with better mechanical properties and handling characteristics for better clinical performance