Aidite Coloring Liquid – ST

US$25.00US$40.00 (-38%)

  • Rich colors, good dyeing effect.
  • Excellent penetration: can rapidly complete penetrating the inside of the teeth, easy to color;
  • Simple operation, good stability.
  • Match well with zirconia blank.
  • A1
  • A2
  • A3
  • A3.5
  • A4
  • B1
  • B2
  • B3
  • C1
  • C2
  • C3
  • C4
  • D2
  • D3
Clear

Aidite Coloring Liquid – ST

Aidite Coloring Liquid – ST for the inner crown and a full crown with a rich and bright color coincide with the color of the natural tooth. It has 100% biocompatibility, brush dyeing technology can reproduce every detail and uniform color to increase the aesthetic effect and improve technicians’ performance with super infiltration and simple coloring process.

Coloring Liquid specially used for Dental Zirconia

Features:-

  • Rich colors, good dyeing effect.
  • Excellent penetration: can rapidly complete penetrating the inside of the teeth, easy to color;
  • Simple operation, good stability.
  • Match well with zirconia blank.

Key Specifications:-

Coloring Liquid – ST Shades :

  • A1,A2,A3,A3.5,A4,B1,B2,B3,B4,C1,C2,C3,C4,D2,D3,D4.
  • Make the restoration adhesive with undertone compared with 16 Shade Guide

Packaging:-

  • 1 x 50ml Coloring Liquid bottle

Direction to Use:-

Step 1 : Brush and cutthe end fluid

  • Drop the cut end liquid into the bottle upper middle
  • Drop indicator.
  • Mixing (ratio: 1 Drop Indicator + 25 ml Cut and fluid).
  • Dip with 2# brush Right amount of cut and fluid Not too much.
  • The first pass of vertical painting Cut 1/3.
  • Second pass of horizontal brushing maxillary margin.
  • Brush along the ridge.

Step 2 : Step 2: Immersion (60s)

  • Pour the Staining solution Can cover the entire repair Complex.
  • Put in the restoration, Simultaneous timing.
  • Use plastic tweezers gently Shake restoration, drain Remove bubbles.

Step 3 : Drying

  • Drying tools : oven.
  • Drying temperature: 70 C.
  • Drying time : Single crown, under 6 units, minimum drying time is 20 mins.
  • The minimum drying time for bridges of 6 units and above is completed follow the sintering curve specified by Aicte.

Drying before rapid sintering:

  • Drying tools: oven.
  • Drying temperature : 150 C
  • Drying time : 30 min
  • After the operation is completed, follow the sintering curve specified by Aidite

Additional information

Shade

A1, A2, A3, A3.5, A4, B1, B2, B3, C1, C2, C3, C4, D2, D3

Only logged in customers who have purchased this product may leave a review.

Reviews

There are no reviews yet.

Main Menu

Aidite Coloring Liquid - ST

Aidite Coloring Liquid - ST

US$25.00US$40.00 (-38%)

Add to cart