Pulpdent Porcelain Etch Gel 4.8ml

US$85.00US$120.00 (-29%)

In stock

  • Does not stain ceramic or composites
  • One-minute etch
  • Thixotropic – stays where placed
  • Buffered formula
  • Washes off easily
SKU: DE14012 Categories: , ,

Pulpdent Porcelain Etch Gel

  • Pulpdent Porcelain Etch Gel 4.8ml is a one minute application etching gel on crowns, veneers, inlays and fractured surfaces prior to bonding.
  • This superior quality porcelain gel will not stain ceramic or composites.

Features :-

  • Does not stain ceramic or composites
  • One-minute etch
  • Thixotropic – stays where placed
  • Buffered formula
  • Washes off easily

Packaging :-

  • 1 x 4.8ml Syringe

Direction to Use :-

1. Protective eyewear must be worn by practitioner, assistant and patient. Protective gloves must be worn by practitioner and assistant.

2. Place rubber dam to isolate operative site and protect soft tissue.

3. Assistant must stand ready at chairside and hold vacuum tip 2-3 inches from porcelain surface during the etching process to evacuate acid fumes.

4. Securely attach 25-gauge luer lock applicator tip to syringe. Carefully start the flow of Porcelain Etch Gel on a pad and immediately dispose of this sample. Do not start flow in patient’s mouth. For maximum control of flow, do not push on plunger with thumb. It is recommended instead to hold syringe barrel between thumb and forefinger while resting plunger in palm of hand. Gently pull back with thumb and forefinger to start flow. Use a new dispenser needle for each patient.

5. Carefully apply Porcelain Etch Gel to porcelain surface and leave for one minute while evacuating fumes with vacuum. For lithium disilicate restorations, etch for 10-15 seconds. Some ceramic materials are resistant to etching. To achieve a surface suitable for bonding to these materials, air abrasion is recommended. Creating mechanical retention is advantageous. Cap syringe immediately after use.

6. Rinse surface with copious amounts of water and dry porcelain surface with clean uncontaminated air.

7. If using EmbraceTM First-CoatTM, follow instructions for use for First-CoatTM or the EmbraceTM Restoration and PFM Repair Kit. If using Pulpdent Silane Bond Enhancer, follow instructions for use for silane.

8. Proceed with repairs of fractured porcelain teeth or with cementation of porcelain crowns, veneers or inlays.

Average Rating

5.00

01
( 1 Review )
5 Star
100%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Only logged in customers who have purchased this product may leave a review.

1 Review For This Product

  1. 01

    by Rachel Lang (verified owner)

    nice product. One-minute etch

Main Menu

Pulpdent Porcelain Etch Gel 4.8ml

US$85.00US$120.00 (-29%)

Add to cart