Tokuyama Palfique Lx5 Syringe Refill

Tokuyama Palfique Lx5 Syringe Refill

Palfique LX5 Syringe Refill is an advanced light-cured composite resin designed for anterior and posterior restorations, suitable for all carious classes. Comprising 82% by weight (71% by volume) of silica-zirconia filler and composite filler, it exhibits decreased polymerization shrinkage due to its high filler load. The inorganic filler, featuring spherical submicron particles (mean size: 0.2μm), ensures exceptional gloss retention and wear resistance. The monomer matrix contains Bis-GMA and Triethylene glycol dimethacrylate. Incorporating Radical-Amplified Photo polymerization initiator technology (RAP technology), PALFIQUE LX5 offers a one-third reduction in curing time compared to conventional resin composites, facilitated by a light curing unit with a wavelength range of 400 to 500nm.

Indications :

• Direct anterior and posterior restorations, including occlusal surfaces, covering all carious classes.
• Direct bonded composite veneer.
• Diastema closure.
• Repair of porcelain/composite.

Key Specifications :-

• Quick Curing Time: 10 sec. with halogen light (≥400mW/cm2)
• Extended Working Time: 90 sec. under ambient light (10,000 lx)
• Available in 20 shades
• Extended workig time
• Outstanding polishability

Packaging :-

• 1 x Palfique LX5 Syringe Refill (3.8g)

Directions For Use :-

Isolation :

• Isolate the treatment area using a rubber dam or other suitable isolation methods to prevent contamination.

Tooth Preparation :

• Prepare the tooth according to standard restorative procedures, removing any decay or damaged structure.

Etching and Bonding :

• Etch the tooth surface with an appropriate etchant, rinse, and apply a bonding agent as per the manufacturer’s instructions.

Application of PALFIQUE LX5 :

• Dispense the PALFIQUE LX5 from the syringe onto a mixing pad. Use an appropriate instrument for placement and shaping.

Light-Curing :

• Light-cure PALFIQUE LX5 using a suitable light-curing unit. Follow the recommended curing time and ensure adequate coverage of all applied material.

Finishing and Polishing :

• Once cured, finish and polish the restoration using fine finishing burs and polishing discs to achieve the desired aesthetics.

Check Occlusion :

• Verify occlusion to ensure proper bite and adjust if necessary.

Clean Instruments :

• Clean placement instruments with alcohol after use.

Patient Instructions :

• Advise the patient to avoid chewing on hard objects immediately after the procedure.

Safety Precautions :

• Adhere to safety precautions, including the use of protective eyewear when using a light-curing unit.