-
Maarc Boxing Wax
- It is soft and tacky for boxing in impressions.
- Adheres easily to most of the surfaces.
-
Maarc Pattern Wax
- The basic classification from our side is being done based on hardness and stiffness and flow of waxes.
- Softer waxes with high flow are more flexible and are often used
- Flexible
- Fit perfectly in cervical areas
- High adaptation
- Stability to surfaces
US$16.00US$22.00Maarc Pattern Wax
US$16.00US$22.00 -
-
Maarc Die Spacer Separator
- Increases film formation and wetting on the mold surface at the very high temperatures produced during the die casting process
- Excess of die lubricant fails to evaporate, leading to porosity inside the casting and poor surface finishing of the part.
US$17.00 – US$27.00Maarc Die Spacer Separator
US$17.00 – US$27.00 -
-
-
-
-
-
-
-
-
-
-
MAARC Cold Cure Powder 3Kg
- A cold cure self polymerizing acrylic material suitable for all types of repairs to acrylic dentures.
- Working time of 4 minutes.
- Rapid bench cure time of 14 minutes.
- Also useful in orthodontic work.
- Available in pink, clear shades & light veined shades.
US$148.00US$200.00MAARC Cold Cure Powder 3Kg
US$148.00US$200.00 -
-
-
-
US$129.00
US$170.00MAARC Cold Cure Monomer – 4ltrs
US$129.00US$170.00 -
-
-
-
-
-
-
-
-
US$164.00
US$200.00Bonart Electrocautry Scaler Body
US$164.00US$200.00 -
US$109.00
US$145.00Bonart P6 Scaler Main PCB Card Led
US$109.00US$145.00 -
-
US$67.00
US$73.00Bonart Electrocautry Display PCB Cover
US$67.00US$73.00 -
-
US$155.00
US$190.00Bonart Electrocautry Display PCB
US$155.00US$190.00 -
-
-
US$67.00
US$73.00Alpro Desnet For Surface and Environment 1 Ltr
US$67.00US$73.00 -
-
-
Dpi Fine Grain Silver Alloy
- Fine Grain – high silver content (68.7%) alloy that has been the all time favorite for years.
- High Strength.
- Easy Carving.
- Superior Polish.
US$84.00US$94.00Dpi Fine Grain Silver Alloy
US$84.00US$94.00 -
-
Maarc MTA Repair Material
- Excellent Handling Properties
- Fine Grain
- Fast Setting
- Pure Mineral Tech : No Discoloration
- Bactericidal effect due to High pH
- Biocompatible
- Promotes mineralization of tissue
- High Strength make is suitable as base restoration material
- Good radiopacity
-
Maarc CeraSeal-B Sealer
- Excellent Handling
- Hermetic seal
- Radiopaque
- Suitable as lining material
- Pure Mineral Tech :No Discoloration
- Bactericidal
- Biocompatible
- Good radiopacity
US$39.00US$45.00Maarc CeraSeal-B Sealer
US$39.00US$45.00 -
Maarc D-Vitz Pulp Devitalizer 3gm Syringe
Luer tips are offset from barrel centerThese polypropylene syringes with Luer tips, may be used with any size needle. The rigid polyethylene plungers of these disposable syringes are slightly oversized, creating a tight seal against the walls of the semi-flexible PP barrel, as well as providing an exceptionally smooth draw. No contaminating lubricants added.US$31.00US$35.00Maarc D-Vitz Pulp Devitalizer 3gm Syringe
US$31.00US$35.00 -
Maarc Utility Wax
Base plate wax is a durable substance used mainly to fabricate occlusion rims for dental construction into which denture teeth are arranged (IE. holding artificial teeth to baseplates) before laboratory processing and during fabrication of the denture.
-
Maarc Spacer Wax
- Thin wax sheets of 0.3 mm thickness – shape of upper and lower base plates.
- Provide uniform thickness of impression material.
- Use of spacer wax prevents direct contact of acrylic trays with soft tissues.
US$20.00US$24.00Maarc Spacer Wax
US$20.00US$24.00 -
Maarc Gsol
- Non hazardous, non carcinogenic unlike chloroform, trichloroethylene.
- Less volatile as compared to chloroform, trichloroethylene.
- Based on natural substances D – limonene, does not cause irritation to oral mucosa and periapical tissue.
- Evaporation of solvent is less due to low volatility.
US$22.00US$25.00Maarc Gsol
US$22.00US$25.00 -
Maarc Cold Cure
- A cold cure self polymerizing acrylic material suitable for all types of repairs to acrylic dentures.
- Working time of 4 minutes.
- Rapid bench cure time of 14 minutes.
- Also useful in orthodontic work.
- Available in pink and clear shades.
-
Maarc Die Thinner
Maarc Die Hardener & Spacer thinner
- Brand : MAARC
- Model : DIE THINNER
- Maarc Die Thinner : Die Thinner
US$18.00US$24.00Maarc Die Thinner
US$18.00US$24.00 -
-
Maarc Ni-Cr Alloy White Metal
- It is beryllium free alloy with excellent castability.
- It is reusable with addition of appx 50% fresh metal during recasting.
- It can be cast in open flame.
- It has got good burnish ability and is easy to finish.
- It can be used for making cast crown bridge and pontics and frames for hard resin crowns.
US$83.00US$130.00Maarc Ni-Cr Alloy White Metal
US$83.00US$130.00 -
-
Maarc Die Hardner
- It produces a homogenous coating on the die stone and plaster attributed to its viscosity.
- It seals, hardens and water proofs stone and plaster.
- It protects models against abrasion specifically at marginal area which is most prone to breakage.
- The film does not disassociate from the die while building wax pattern due to heating.
- It is rapid setting and thereby reduces working time.
US$22.00US$32.00Maarc Die Hardner
US$22.00US$32.00 -
Maarc Sealmax-R Resin Based Root Canal Sealer
- Permanent obturation of root canals of teeth of the secondary dentition with or without the aid of obturation points.
- Eugenol Free
- Insoluble in water and non degradable
- Minimum shrinkage at room temperature
US$25.00US$34.00Maarc Sealmax-R Resin Based Root Canal Sealer
US$25.00US$34.00 -
-
Bonart
For over 25 years, Bonart™ has been the trusted brand of choice for dentists and veterinarians seeking unparalleled quality, reliability, and affordability. From modest origins as a family-run shop in Taiwan, they have grown into an esteemed brand that sets the standard for industry craftsmanship and performance. Featured in esteemed publications like Gordon Christensen’s CR Report, Bonart™ has consistently championed the core belief: providing access to top-notch dental and veterinary equipment for future generations worldwide, regardless of financial constraints or demographics. At Bonart™, they believe that quality dental care should be accessible to all, and it starts with their commitment to manufacturing excellence. Their products are meticulously crafted with the highest level of quality assurance, ensuring they meet the needs of both high-volume clinics and smaller provincial practices. Efficiency, durability, and dependability are the hallmarks of every Bonart™ dental equipment, enabling practitioners to deliver exceptional care with confidence. Bonart™ dedication to delivering superior products is exemplified by their certifications and registrations. Bonart™ products are ISO 13485 certified, a testament to their adherence to international quality-management standards. Additionally, where required, their products are US 510K registered, further validating their safety & effectiveness.
With Bonart™, you can trust that you are choosing a brand that combines ingenuity, reliability, and affordability without compromise. Their legacy of excellence is built on a foundation of unwavering commitment to delivering industry-standard dental and veterinary equipment to professionals around the world.